These Have The Original 3 Prong Plug Design On The Back So They Will Plug Directly Into The Original Wiring Harness. These Will Fit Any Car Or Truck That Has 2 Rectangle Glass Headlights That Are 5X6 7X6 Inches. 360 Degree / P2 Series CSP Chip Perfect Beam Angle. H4 - Dual Beam Function You will have HIGH AND LOW! 500% Brighter than Stock Halogen.
Built in IC Circuit (Current Regulator)-Prevents LED Damage From Voltage Variations & Spikes. Operating Voltage: DC 12V / 24V. Amperage: 1.9A - 2.9A. Maintenance free, Waterproof IP67, Shockproof.2x H4 LED Bulbs (Hi/Lo Dual Beam). How Do I Know These LED Bulbs are Right for My Vehicle? Plese check your vehicle user manual or original halogen bulb, the part number is marked above. Plese search "automotive bulb look-up" online, and enter your vehicle info to find out the correct size. Or in'Customer questions & answers', write down your vehicle year, make, and model, we will help you check. Q1: Will this bulb fit my vehicle? A1: We can match almost any vehicle to one of our bulb sizes.
But if your vehicle does not show up on the compatibility table at the top of our listings. Q2: My item has not arrived, what's taking so long? A2: Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up.If your item still don't arrive after a few days, let us know so we can double check for you and help solve it asap. Q3: My bulbs won't fit, help! A3: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know. The bulb size may be wrong, double check the item you received with the item you ordered.
Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications. Q4: Neither side lighting up?Both sides flicker, hyper flash, or work inconsistantly. A4:Check the light fuses, and then check the ballast plugs to insure correct installation.
If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor. Even though some bulbs are builtin resistors, they may still need a decoder.Q5:Why after installing the bulb, there have the flicker/error message/radio interference? A5: Some car's system is sensitive to the led bulb, we can send the decoder/resistor to help you solve the problem. Item do not fit your vehicle perfect. The item arrived be broken. For Canada & Mexico or other countries. From there, it's sent to you. To avoid initiating an unpaid item claim, please pay within 7 days. We will solve the problem! We always put our customers first and your satisfaction is guaranteed.